Giving your customers a quality clean is one of the most crucial aspects of owning a laundromat. When your customers pay to wash their whites in hot water, they expect hot, clean water. Getting the right water heater for your laundromat is key to delivering the topnotch clean your customers demand. While it is essential to meet your customers' expectations, it's also necessary to keep your utility costs low. The right water heater will let you do both. Are you tired of searching for the right Dexter dealers in Charleston, SC
What's the Best Water Heater?
There are two common types of water heaters in use in laundromats today. Instantaneous or tankless water heaters produce on demand hot water, while water heaters with storage tanks heat large amounts of water and run periodically to keep the water at the desired temperature. Knowing a little more about each can help you determine which one is the best solution for your laundromat.
Instantaneous or Tankless Water Heater
Hot water is produced only when needed. A large heating coil sits over a big flame. When there is a demand for hot water, this flame is ignited. An instantaneous heater works with a restricted water flow so that only a certain amount of hot water is produced at one time. Typically a tankless water heater provides nine to ten gallons per minute (GPM) for a 30-degree rise in temperature. Multiple tankless water heaters will be required to produce enough hot water to meet the demand of a modestly sized laundromat. A system that is correctly sized and designed can meet the needs of any laundromat, leaving your customers with plenty of hot water.
Hot Water Heater with a Storage Tank
The storage tank system is designed to have hot water ready on demand. If a customer were to start five large washers, the demand for hot water would easily be over 70 gallons of water. As hot water is used, cold water enters the storage tank and is heated to a holding temperature of 120-130 degrees. The downside to this system is that you are continuously heating the tankful of water to maintain a constant temperature of 120-130 degrees. However, the upside is that there is always hot water ready for the customers.
Regardless of which system you choose, getting the correctly sized system is essential. Imagine running out of hot water in the middle of your Saturday laundry rush. If your water heater is too small, that nightmare could become a reality. With the instantaneous water heater, if there is too much water demand, the system will only produce about four GPM. As a result, the hot water flow rate will diminish and wash cycle times will increase. Installing multiple instantaneous heaters will help balance the demand, but during your busiest times, customers may see their cycle time increase from 30 minutes to 45 minutes. In the case of a storage tank water heater, during times of high demand, the water heater will be working almost continuously to make enough hot water and customers will notice that the hot water they are getting isn't truly hot.
The Best Alternative to Dexter Dealers in Charleston, SC
Unsure which type of water heater is right for your laundromat? Let the professional staff at T & L Laundry Equipment help you choose the right water heater for your business. We know how to design a water heater system that will exceed your customers' demands on the busiest days and keep your utility costs in check. Call or come by our showroom today and learn more!
1 Response